PHONE: 410-752-7663

REQUEST A FREE ESTIMATE

HomeTestimonialsCouponsContact

Did You Know? There are About 20 Types of Roof Styles

Home owners or building owners might not be aware they had multiple choices regarding their roof design, but here are 20 of the most popular roof styles and their associated pros and cons.

1. Flat Roof

Most flat roofs are not really 100% flat, but rather they are low-sloped roofs that appear flat, but have a little bit of a slope to allow for the run-off water. Flat roofs are commonly found in modern architecture style homes, commercial buildings, or in home additions like sun rooms. As the name implies, a flat roof should have no pitch, which could lead to the issue of rainwater creating a stagnant pool for mosquitoes, bacteria, mold, to thrive. The problem can be solved by drains, scuppers, and gutters to alleviate the water. Shingles and other traditional roofing materials are not options for flat slope roofs, so they are instead covered either by rubber membranes or a tar/asphalt coating that provides water protection. PVC and TPO roofs are the other options to explore. – They offer better longevity and durability compared to EPDM rubber roofs.

2. Gable

The term ‘gable’ refers to the triangle spot that is formed when the two pitched areas of your roof meet. It makes sense then that a gable style roof is basically one side up and the other side down similar to the roof on a traditional dog house. Roofing contractors love gable roofs because they involve covering only two flat surfaces without any hips or valleys and virtually every type of roofing material can be used. The gable design is available in almost any type of roof pitch from low-slope ranch style homes to steep A-frames. One of the only major problems with a gable roof is that they hang over creating eaves which are ripe for peeling off completely under strong winds.

3. Hipped

One of the biggest problems with this gable style roof  is that the ends of the home have no shade or cover because there is only two roofing surfaces. The style of roof that fixes that problem is the hipped roof, defined as ‘when all sides slope downwards towards the walls’. Hipped roofs usually have four sides – two with triangle shapes and two with trapezoids. One of the difficulties with a hipped roof is matching materials between the sides and ends. They do perform better in high wind areas however, especially the steeper the pitch.

4. The Dutch Gable

This type of roof solves the individual problems created in both the gabled and hipped design is the  or Dutch gable design which basically puts a gabled roof on top of a hipped roof. The result is easier access to the lower portion (hipped) of the roof with the added benefits of natural light and attic or bedroom space (gable). Most type of materials can be used in a Dutch gable roof and in fact using variations in colors or types actually adds a nice contrast.

5. The Jerkinhead

The jerkinhead roof design typically features mostly gable with a little bit of hipped mixed in. Gable roofs that are clipped into a short hipped design on the ends are structurally superior to wind uplift. This design is frequently seen on the second story of a house where the clipped hip doesn’t disrupt the view from a dormer window.

6. Saltbox

The saltbox roof is one of the most popular in New England and northeastern US. The asymmetrical design is trademarked by the front of the home having 2 stories compared to one story in the back. The look resembles a profile view of the old salt boxes which utilized that design so it was easier to pour. The long protrusion of the rear roof portion extending almost to the ground makes it great for rainwater to disperse from. One of the cons includes rooms on the backside of the house having slanted ceilings, limiting tall people to use essentially half the house. The saltbox does provide more wind resistance than a standard gable house though – perfect if you can get around the unique looks.

7. Catslide

A catslide is very similar to a saltbox style roof except that they are often only used in portions of the back roof or on home additions. Catslides extend beyond the eaves of a building, creating more depth at the cost of height. A catslide might be used as an extension into a mudroom/entrance or a transition into a three-seasons/sun room.

8. Dormer

A dormer isn’t necessarily an independent roof type, but more of an addition to an existent roofing style. A dormer is a window and a roof (gabled, hipped, flat, among others) that protrudes from the existing slope of a roof. Like some contractor’s tool belts a dormer can either be functional or just for show. A functional dormer creates usable space out of the roof of a building, adding natural light and headroom. A false dormer is blocked off from the interior and is only used to boost curb appeal from the exterior. Dormers are usually, but not always, roofed in the same material as the house. To many roofing contractors they are a nuisance and an extra spot where a leak could arise, but for homeowners they serve as a priceless reading nook or way to get morning sunshine.

9. Shed Roof

Most roofing styles are defined on how their various slopes tie-in to each other. The shed roof design however features no adjoining slopes as it is pitched in only one direction. This design is growing in popularity in modern homes while continuing to be a faithful option for, as the name implies, sheds. Those who opt for shed roofs in their home do so to eliminate often impractical attic space with functional and aesthetic interior room. The design lends itself to a lot of natural light into the building while creating a unique profile in the neighborhood. Shed roofs still have a pitch, although one way, so they still allow rainwater to easily run off making all roofing materials viable.

10. The Lean-To

A lean-to is very similar to a shed roof except for the fact that its single slope feeds into the side of an existing building. Some carports utilize the lean-to design but in modern construction they can also be found in additions such as a sun rooms, a home office, or on a deck with permanent awning. While the lean-to building design may vary the roof is typically constructed of an inexpensive material.

11. The Mansard

The French mansard design is perhaps the roof that most looks like a comfortable hat to adorn your building. The profile of the roof actually features two slopes within one on each side. The bottom part of the roof slope is steeper so that the pitch of the roof barely starts. This allows more room on the inside and in most cases creates an extra story within the roof part of the building. The top part of the roof slope is angled more as it meets up with an adjoining flat or low slope roof. The mansard roof creates extra space, but can be a framing nightmare. The use of metal materials are popular because of the avoidance of difficult maintenance and access down the line.

12. The Gambrel

The Gambrel design is basically the same as the Mansard except the former has two slopes instead of four. You’ll be most familiar with this dual-sloped style as used in a barn and the design is often referred to as a barn roof. The bottom of the slope is steep and nearly vertical before the top slope angles into the ridge. The design creates increased space as an attic can even be installed in the top sloped portion. The open style and minimalistic construction does lend itself to a couple potential downfalls however – the crumbling under heavy snow buildup and shaking in high winds. Metal is a long-term material solution with its minimal maintenance, but you’ll notice many Gambrel roofs adorned with asphalt or even wood shingles.

13. Rainbow Roof

A rainbow roof is very similar to a Gambrel except for the fact it has an arch instead of two slopes. This design solves the problem of snow buildup especially when used on a single-story barn or garage. Something you’ll notice about many of the different roofing styles is that they contain characteristics of other types. A rainbow roof for instance could technically be labeled a gable roof with two different “slopes” that meet at a ridge. The materials able to be used in a rainbow roof are also similar to those used for a barn, or Gambrel, roof.

14. The Bonnet Roof

The Mansard is characterized by two slopes within a side – steep on the bottom to increase interior room and sloped at the top to connect to a ridge. The bonnet is basically that style but in reverse. The top of the bonnet home slope is steep whereas the bottom is quite flat and extends well beyond the eaves of the home. This design helps create a porch-like shaded area all around the building. The sloped top may seem like a waste of space but is actually great for creating vaulted ceilings or installing windows for natural light. The eaves extending beyond the house help to avoid water seeping around flashing and down the interior walls.

15. M-Shaped Roof

Much like how a rainbow roof has characteristics of multiple other styles, an M-shaped roof could basically be considered a ‘double gable’. The M-shaped roof features two sloped sides that meet in the middle with corresponding slopes on each side. This pattern could be repeated multiple times especially in condominiums or a strip mall. The obvious downfall of this design would be snow and rain building up in the center where the two slopes meet but this is alleviated by a central gutter running from front to back, perpendicular to the front of the building. Even so, the pitch of M-framed roofs is generally steeper to assist in runoff and to ‘catch’ less rain and snow.

16. Hexagonal

One of the biggest problems with creating a six or eight sided building such as a gazebo or shed is determining how to bring the roof together. Unless you go military style and adorn the building with a flat-top, the roof needs to have equal sides as the walls which involves a lot of framing and has high materials costs. Some hexagon roofs can tie into a smaller hexagon shape at the top but either way there should be some slope. In recreational buildings virtually any type of material can be used for the roof.

17. Butterfly Roof

One of the main reasons to clarify that M-shaped roofs not only meet in the middle, but are also sloped on each side is because a butterfly roof style simply adjoins in the center and not the sides. This is a very modern design that is aesthetically unique like viewing a butterfly in flight while looking on from the exterior. The design borrows some from the concept of the shed roof, avoiding a slope on the backside to allow more natural light and functional space into the interior. The pitch is generally lower than an M-shaped roof because the butterfly has to cover sometimes the entire area of a floor plan. Thus more rainwater is captured which means increased drainage capacity is needed down the center.

18. Clerestory

Clerestory roofs are built with one thing in mind – natural light. What they essentially amount to is a gable roof that meets at different heights. The bottom slope joints up a few feet lower which creates a location for a vertical wall. This wall is outfitted with numerous windows that allow natural light and warmth into the adjacent room. Since the windows are up high they provide privacy, but also are environmentally friendly with ‘free’ light and heat. Virtually any material can be used on this roof type but proper window installation is key since the clear path of the sun also presents an easy route for the rain.

19. Saw-tooth

Saw-tooth roofs were generally only used in industrial buildings until the popularity of eco-friendly homes began to rise. The profile of the roof looks just like a saw blade with an alternating slope-wall-slope-wall-slope-etc design. The wall part of the roof is outfitted with windows just like a clerestory roof which provides natural heat and light. The slope sheds water into a central drain and creates a vaulted ceiling look on the interior. Since the design is used in eco-friendly homes, environmentally friendly materials are generally used for the roofing.

20. Combination

There is a broad scope when it comes to finding the perfect roof for your needs. Not every roofing type is ideal for your particular climate or even how your building is situated on the property (sunlight, wind, etc.) In these instances custom, or combination, roofs are utilized to give you the best possible function for your building. Combination roofs take two or more different roofing styles and implement them as needed. The result also creates a unique curb appeal and a perfect opportunity to add contrast to your aesthetics. The biggest risks of combination roofs is creating unnecessary valleys where leaks can occur but also designing mismatched looks that are more of an eyesore than an asset.

At Phil DiBello Family Roofing, we rely on our strong backbone of experience and knowledge to maintain our reputation

Quick Links

Home Roofing Siding Windows Gutters

ADDRESS

  1. 1440 E Clement St Baltimore, Maryland 21230
  2. PHONE: 410-752-7663